KP Pushbutton Sample Valve

For Pressurized Systems

The KP Pushbutton Series sample valve can be used to take samples on operating equipment with no sample probe needed. Sample valves allow you to reduce the time needed to extract a sample, while gaining a more representative sample and avoiding external contamination for a more accurate oil analysis result.

Applications

Features

• Patented elastomeric vacuum tight valve seals
• Reliable dual sealed design tested at 7,800 psi for one million cycles
• Automatic valve shut off
• Low purge volume
• Carbon steel with Corrosion resistant zinc-nickel plating
• Locknut available for extra protection against high vibration

Specifications

• Sampling Range: 5 -750 psi (0.03 – 5.17 MPa)
• Working Pressure: 6000 psi (41.4 MPa)
• Seal Material Temperature Range:
  • Nitrile: -40C – 115C (-40F – 239F)
  • Viton: -26C – 204C (-15F – 400F)
  • EPDM: -50°C – 150°C (-58F – 302F)
• Valve Material: Carbon steel with corrosion resistant zinc nickel plating
• Valve Overall Size (L x W): 2” x 1.5” (approx.)

Download PDF

Buy Online

Related Articles

Sampling Procedures: KP Pushbutton Valve
Oil Sampling Procedures (PDF)
Webinar: Oil Sampling Procedures
Short Course: Oil Sampling Basics